New HKS F-CON IS

Description

[ Product Information ]
This is Brand
**New**
HKS F-iS
It's never been used or installed and all documents go together.
- Part Number:
42011-AK003
** Harness for vehicle or sensors, mapping data are not included.
** You may find more detail information at the bottom of this page.
[ Shipping and Payment ]
Payments:
Paypal only
Free Shipping to Worldwide
Shipping:
We ship by EMS(Express Mail Service) and it usually takes 4-5 business days to be deliverd.
We ship within 1 business day after receipt of cleared payment.
Customs fees and duties must be paid by the buyer, and not the seller. By purchasing this item, you agree to pay for custom duties and taxes
[ Returns and Exchanges]
Items must be returned within 14 days of receiving shipment. Store credit will be given or money back.
For any returned items, there will be a 15% re-stocking fee.
If returning an item, or exchanging, buyer must pay for return shipping both ways.
B
elow is product inormation from HKS Japan. You may find your vehicle's harness from the link.
F-CON iS can control the latest advanced engines.
Just connect to a stock ECU with a vehicle specified harness without modification.
HKS "F-CON iS" is a piggy-back ECU for fuel and ignition management as well as new features.
Functions for fuel and ignition controls are inherited from the previous model F-CON SZ. In addition to it, function to collect OBD II diagnosis data was added for correction of setting due to stock close-loop correction values when intake/exhaust parts are upgraded or boost level setting is changed.
* To edit the control data or settings must be done by the F-CON Dealer.
Functions
Functions of F-CON iS 1
Correction of Fuel amount
Correction of Ignition Timing
Fuel signal and Ignition Timing are controlled with trim maps inside F-CON iS. Four sub maps for each fuel and ignition control can be easily switched with dip switches.
FCD Function
Fuel Cut at high boost level can be cancelled with FCD function.
SLD Function
Vehicle speed signal can be controlled to cancel speed limiter by stock ECU.
* Not for Automatic Transmission and electro-magnet pick up type sensor.
Engine Check Function
Even with F-CON iS, engine check function of stock ECU works.
(Except some vehicles)
Functions of F-CON iS 2
A/T Shift Up, Shift Down Ignition Compensation
A/T Shift Up, Shift Down Ignition Compensation
To prevent knocking of vehicles with automatic transmission during shift up at high load or shift down for acceleration, engine rpm difference and throttle position is kept and ignition timing is retarded for a certain period.
NVCS Control Function
*
Solenoid of Nissan NVCS (Nissan Valve Control System) can be controlled with F-CON iS with RPM + Water Temperature condition.
Air Flow (Intake Air Volume sensor) Conversion Function
Air flow meter signal input can be converted with a 16x24 map with Air Flow Input value and RPM axis. When characteristics of air flow meter output are changed from stock condition, air flow meter signal can be corrected.
(Get advice from PowerWriter shops.)
New Functions of F-CON iS
Video Output Display Function (NTSC only)
Output signals from F-CON iS can be displayed on a monitor.
Up to 18 items
Each data can be shown by bar graph and numbers.
With Screen changeover switch, items of the screen can be changed. (Items can be selected with PowerWriter.)
Basic Items :
Engine rpm, Vehicle Speed, Air Flow meter output voltage, Throttle Position, Water Temperature, Intake Air Temperature, Battery Voltage, Injector Duration, Pressure
Example
With DB Meter I/F Unit, A/F Knock Amp. or Communication Cable, any data can be shown on monitor
I/F Unit + Sensors
Items : Boost (Vacuum) Pressure, Oil Temperature, Water Temperature, Oil Pressure, Fuel Pressure, Exhaust Gas Temperature
A/F Knock Amp.
Items : A/F value, Knock Sensor level
Communication Harness
Items : OBD Ignition Timing, A/F Correction Value, A/F Close-Loop Value
* One of I/F Unit or Communication Cable can be connected.
Other Functions
AIC Function
Up to 2 additional injectors can be controlled.
Remarks: Injectors are required separately.
EIDS Function
When throttle is closed, intake air returns to air flow meter and it affects to air flow meter voltage. The voltage can be fixed to a certain voltage to prevent engine stall.
Remarks: SQV is required separately.
Immobilizer Function
When ignition is turned on, if switch is not at setting value, engine will not start.
Remarks : Mixture Controller is required separately.
OSC
It enables Fuel setting for Stock close-loop area.
(Setting at PowerWriter shops is required.)
F-CON iS UNIVERSAL
Product
Code No.
Price
Detail
Remarks
Universal
42011-AK003
For PowerWriter shops. No data included.
Universal + OSC Set
42011-AK004
For PowerWriter shope. No data included. Setting by PowerWriter is required. OBDII communication cable included.
F-CON iS TYPE-IG
42011-AK005
For PowerWriter shops. No data included.
F-CON iS OBDII Communication Cable
42999-AK009
For PowerWriter shops. Compatible with ISO14230 OBDII coupler.