-40%

6-12HP Outboard Motor 2-4Stroke Fishing Boat Engine Water/Air Cooled HANGKAI USA

$ 121.96

Availability: 372 in stock
  • Boat & Watercraft Type: Outboard Motors
  • Refund will be given as: Money Back
  • MPN: Does Not Apply
  • Condition: New
  • Restocking Fee: No
  • Returns Accepted: Returns Accepted
  • Item must be returned within: 30 Days
  • Return shipping will be paid by: Seller

    Description

    Store category
    Sign Up Now !
    You may also like
    6-12HP Outboard Motor 2-4Stroke Fishing Boat Engine Water/Air Cooled HANGKAI USA
    Product Description
    Cylinder Scoring is a serious damage,which caused by improper use and will cost you a lot of money to repair the motor.
    Don't do the following will avoid cylinder Scoring:
    1,start the motor on bank
    2, use the motor when it stop coming out of water
    Even if you want test the motor, it should be done in the river!
    1.About the noise: all the gasoline machines are noisy, currently we did not test the decibel , but the noise is the same as the motorcycle, so it is a normal phenomenon
    2.The machine itself is lightweight, it can use on boat weight of 100kg or less , load-bearing 4 people, but the speed is certainly not the same when one person on it or 4 people on it . Customer who has high expectations on speed, please be noticed
    3.It can be marched with inflatable boats, rubber boats or fishing boats
    4.Necessary: you have to prepare a boat-motor stand or Hanging board on your boat
    MODEL ONE: 3.5HP & 2-Stroke(TYPE ONE)
    Notice:
    Please add gear oil to the gears before use the motor and replace gear oil after the run-in period(10 hours).(if you do not know how to handle this,please contact us)
    .
    our outboard motor doesn't with oil of gear,please prepair it by yourself .Keep in mind that you must add oil on the gear beofore use !!!
    About certification:
    We can
    only provide CE certification
    , there is no other certification can be provided,thanks for your understanding.
    SKU:OT-028
    Two strokes 3.5 hp and 3.6 hp are controlled by the handle, which is operated by the clutch. There is no Neutral, only idle mode or low speed mode
    STRICTLY FOR PROFESSIONAL USE ONLY
    Please Note:
    There are two pull starter included in the parcel(one is the machine, another one for spare)
    We don't supply wearing parts (pull starter)for free.
    If you want buy one please click:
    Description:
    Overall length:92CM
    Overall widteh:36.5cm
    Overall height:22cm
    Transom height:42cm
    Full throttle perating range:4000-5000r/min
    MAX SPEED:4000~5000rpm
    Maximum output:2.5kw(3.5HP)
    Speed:10km/h
    Type:2-stroke
    Short shaft :40cm
    Ignition system: CDI system
    Starting system: Manual start
    Staring carburetion system: Choke start
    Propeller mark:7-1/45-A(inch)
    The engine and the propeller ratio:2:1
    Recommended fuel: Regular unleaded gasoline
    Fuel to oil ratio: 35:1 (Please be suject to this version, and disregard the manual about this point)
    Gear ratio: 27/13
    Maximum speed: 10 km / h
    Built-in fuel tank: 1.3L
    Fuel consumption per hour: 1.5L
    When at normal cruising, the appearance of the seventh picture. Falling back the boat, the appearance of the outboard motor likes the eighth picture . Falling back the boat, you should drive slowly otherwise the boat will not stable. The outboard motor backet can revolve 360. Only in simple let the engine revolve 180 and the operation handle face back, the boat can fall back to drive.
    Announcements:
    After in the sea water or turbid water cruising
    1.Use the fresh water cleaning the outboard motor
    2.With the moderate velocity circulating the engine,cool off the water chanel with fresh water.
    3.Before completely running out cooling water,don't put the outboard motor outside. Otherwise the water cam pass the exhaust port to enter the air cylinder, from that will cause the engine breakdown.
    4.The engine should deposit in the aridity and ventilated well place,avoid exposing directly in the sunshine.
    5.Before the long term storing,you should run out of the gasoline in the fuel tank.
    MODEL TWO:
    3.6HP & 2-Stroke
    Notice:
    Please add gear oil to the gears before use the motor and replace gear oil after the run-in period(10 hours).(if you do not know how to handle this,please contact us)
    .
    our outboard motor doesn't with oil of gear,please prepair it by yourself .Keep in mind that you must add oil on the gear beofore use !!!
    About certification:
    We can
    only provide CE certification
    , there is no other certification can be provided,thanks for your understanding.
    SKU:OT-ML-132
    Two strokes 3.5 hp and 3.6 hp are controlled by the handle, which is operated by the clutch. There is no Neutral, only idle mode or low speed mode
    STRICTLY FOR PROFESSIONAL USE ONLY
    1.Start-In-Gear protection/clutch feature prohibits prop rotation while idling
    2.Lift/Tilt feature for shallow water operation and convenience
    3.Features 360 degree steering rotation for reverse without gear shifting
    4.Superior engine water cooling system for improved engine performance
    5.Easy pull off engine cover with push button latch for instant motor access
    Product Description
    MAX SPEED:4000~5500rpm
    Short shaft :40cm
    Features: Features 360 degree steering rotation for reverse without gear shifting .
    Start-In-Gear protection/clutch feature prohibits prop rotation while idling .
    Lift/Tilt feature for shallow water operation and convenience . Superior engine water cooling system for improved engine performance . Easy pull off engine cover with push button latch for instant motor access . Standard CDI ignition system for easy starting and improved
    performance . Vertical mount engine design for increased power, performance and durability . Superior carbonation system with primer bulb for increased efficiency .
    Twist grip throttle handle and engine stop button for improved response .
    Superior outboard anti corrosion system and anodes for increased durability .
    Durable cast Nylon plastic construction for superior corrosion protection .
    Through the prop exhaust outlet for decreased noise and pollutant .
    Heavy duty lightweight Nylon plastic cast propeller is standard equipment
    Shipping Weight:
    21.4 pounds
    MODEL THREE:3.5HP & 2-Stroke (TYPE TWO)
    Notice:
    Please add gear oil to the gears before use the motor and replace gear oil after the run-in period(10 hours).(if you do not know how to handle this,please contact us)
    .
    our outboard motor doesn't with oil of gear,please prepair it by yourself .Keep in mind that you must add oil on the gear beofore use !!!
    About
    certification:
    We can
    only provide CE certification
    , there is no other certification can be provided,thanks for your understanding.
    SKU:OT-ML-279
    Two strokes 3.5 hp and 3.6 hp are controlled by the handle, which is operated by the clutch. There is no Neutral, only idle mode or low speed mode
    Please
    N
    otice:
    STRICTLY FOR PROFESSIONAL USE ONLY
    What you will receive is our new version of this boat engine
    The trademark will be Yadao instead of Speeda.
    Overall length:92CM
    Overall widteh:36.5cm
    Overall height:22cm
    Transom height:42cm
    Full throttle perating range:4000-5000r/min
    MAX SPEED:4000~5000rpm
    Maximum output:2.5kw(3.5HP)
    Speed:12km/h(four people)
    Type:2-stroke
    Short shaft :40cm
    Ignition system:CDI system
    Starting system:Manual start
    Staring carburetion system:Choke start]
    Propeller mark:7-1/45-A(inch)
    The engine and the propeller ratio:2:1
    Recommended fuel:Regular unleaded gasoline
    Fuel to oil ratio: 35:1 (Please be suject to this version, and disregard the manual about this point)
    Gear ratio: 27/13
    When at normal cruising,the appe
    a
    r
    a
    nce of
    the se
    v
    e
    n
    th picture. Falling back the boat, the appe
    a
    r
    a
    nce of the outboard motor likes the
    eighth picture . Falling back the boat, you should
    drive slowly otherwise the boat will not stable. The
    outboard motor backet can revolve 360. Only in
    simple let the engine revolve 180 and the operation handle face back,the boat can fall back to drive.
    Announcements
    After in the sea water or turbid water cruising
    1.Use the fresh water cleaning the outboard motor
    2.With the moderate velocity circulating the engine,cool off the water chanel with fresh water.
    3.Before completely running out cooling water,don't put the outboard motor outside. Otherwise the water cam pass the exhaust port to enter the
    air cylinder, from that will cause the engine breakdown.
    4.The engine should deposit in the aridity and ventilated
    well place,avoid exposing directly in the sunshine.
    5.Before the long term storing,you should run out of the
    gasoline in the fuel tank.
    MODEL FOUR:4HP & 4-Stroke
    OT-ML-277
    Notice:Please add gear oil to the gears before use the motor and replace gear oil after the run-in period(10 hours).(if you do not know how to handle this,please contact us) .our outboard motor doesn't with oil of gear,please prepair it by yourself .Keep in mind that you must add oil on the gear beofore use !!!
    About certification:
    We can only provide CE certification, there is no other certification can be provided,thanks for your understanding.
    STRICTLY FOR PROFESSIONAL USE ONLY
    Type: 4 stroke 4 horsepower
    Short shaft :40cm
    Capacity: 52cc
    Transmission ratio: 2.08 (27:13)
    The number of cylinders: 1
    MAX SPEED:4500~5500rpm
    Maximum power: 2.8 kW /4 HP
    Shift position: clutch control
    Package volume: 95x40x30 cm
    Ignition system: CDI
    Cooling system: air cooling
    Starting method: Manual start
    Refueling: No. 93 gasoline
    Propeller size: 7 1/4X7-A
    The maximum fuel consumption: 1.4 liters / hour
    Recommended Lubricant:4 stroke lubricating oil
    Mixing ratio:Pure gasoline
    Trim and tilt system:Manual Tilt
    Start-In-Gear protection/clutch feature prohibits prop rotation while idling
    convenience
    Features 360 degree steering rotation for reverse without gear shifting
    Cooling system: air cooling
    Easy pull off engine cover with push button latch for instant motor access
    MODEL FIVE:
    6HP & 2-Stroke
    OT-C001-073
    Notice:
    Please add gear oil to the gears before use the motor and replace gear oil after the run-in period(10 hours).(if you do not know how to handle this,please contact us)
    .
    our outboard motor doesn't with oil of gear,please prepair it by yourself .Keep in mind that you must add oil on the gear beofore use !!!
    About certification:
    We can
    only provide CE certification
    , there is no other certification can be provided,thanks for your understanding
    STRICTLY FOR PROFESSIONAL USE ONLY
    Technical Parameters
    Dimension
    Overall length 1040mm(40.9 in)
    Overall width 872mm(34.3 in)
    Overall height 332mm(13.1 in)
    Transom height 44CM(17.3 in)
    Short shaft :40cm
    Performance
    Full throttle operating range 5000-6000r/min
    MAX SPEED:4500~5500rpm
    Maximum output 4.4KW/6HP
    Idling speed ( in neutral) 1000
    ±
    100 r/min
    Engine
    Gear positions Forward-neutral-reverse
    Gear ratio 2.15(28/13)
    Trim and tilt system: Manual tilt
    Drive unit
    Recommended fuel Regular unleaded gasoline
    Integral fuel tank capacity 2.5L
    Recommended engine oil 2-stroke outboard motor oil
    Engine oil type Genuine or recommended 2str engine oil
    Lubrication System Engine oil mixed gasoline
    Engine oil mixing ratio Fuel 50: Engine oil 1
    Gear oil quantity 195ml(6.6 fl.oz.)
    Tightening torque for engine
    Spark plug 25.0Nm(18.4 ft-lb) (2.55 kgf-m)
    Engine oil drain bolt 18.0Nm(13.3 ft-lb) (1.84 kgf-m)
    MODEL SIX:
    7HP & 4-Stroke
    OT-ML-278
    Notice:
    Please add gear oil to the gears before use the motor and replace gear oil after the run-in period (10 hours). (If you do not know how to handle this, please contact with us.)
    About certification:
    We can only provide CE certification, there is no other certification can be provided,thanks for your understanding.
    About the noise:
    1. All the gasoline machines are noisy, currently we did not test the decibel , but the noise is the same as the motorcycle, so it is a normal phenomenon
    2. The machine itself is lightweight, it can use on boat weight of 100kg or less , load-bearing 4 people, but the speed is certainly not the same when one person on it or 4 people on it . Customer who has high expectations on speed, please be noticed.
    3. It can be marched with inflatable boats, rubber boats or fishing boats.
    4. Necessary: you have to prepare a boat-motor stand or Hanging board on your boat.
    Note:
    Must read before use!
    Four stroke 7 hp:
    Firstly, Fill the gear oil (open gear box lid and fill it).
    Secondly, Fill NO. 92 petrol, lightly press oil pump 6-10 times.
    Thirdly, Fill engine oil don't exceed the head of the pattern.
    Forthly, Pull the gear to netural gear, and plug the brake line in, hang the other side of the brake line on your wrist at the same time.
    Then, turn the accelerator gets up to 50% and rapidly pull the starter line.
    After the motor start , please turn the gear to minimum before put another gear.
    Otherwise, the gearwheel will be broken if you put high gear.
    Description:
    Universal motors, high performance, reliable quality
    · Perfect match inflatable boats, fishing boats, sailboats, and small yachts.
    · Economical and compact structure. Durable, lightweight and anti-corrosive construction.
    · Maneuverable and safe twist grip throttle control.
    · Suitable for: Freshwater and saltwater
    · One year warranty covers the motor, to provide parts free
    Type: 4 stroke 7 horsepower
    Capacity: 196CC
    Transmission ratio: 2.08 (27:13)
    The number of cylinders: 1
    Maximum speed: 4500-6000rpm
    Maximum power: 5.1 kW /7 HP
    Shift position: clutch control
    Package volume: 120x60x42.5 cm
    Ignition system: TCI
    Cooling system: air cooling
    Starting method: hand start
    Refueling: No. 93 gasoline
    Propeller size: 3-7 1/2''x5''
    Gear position: F-N-R
    Control system: Tiller control
    N.W./G.W.: 26.7/31.7kgs
    Recommended Lubricant:
    4 stroke lubricant oil
    Trim and tilt system: Mannual tilt
    Standard fuel tank capacity: 1.4L/within
    long shaft :50.8CM
    MODEL SEVEN:
    6.5 HP & 4-Stroke
    OT-ML-282
    Notice:
    Please add gear oil to the gears before use the motor and replace gear oil after the run-in period(10 hours).(if you do not know how to handle this,please contact us)
    .
    our outboard motor doesn't with oil of gear,please prepair it by yourself .Keep in mind that you must add oil on the gear beofore use !!!
    About certification:
    We can
    only provide CE certification
    , there is no other certification can be provided,thanks for your understanding.
    The Hangkai
    6.5 hp 4-stroke
    provides all the power you need for motoring in a small craft. This engine does that as well as providing fuel efficiency second to none and a newly redesigned carrying handle and holding grip make it convenient to transport! With all of this available at a competitive price, it is no wonder this little outboard receives so much attention and praise!
    Brand:
    HANGKAI
    Displacement: 123CC
    Gear ratio: 2.08(27:13)
    Cylinder: 1
    Max.Output(kw): 4.8
    Max.speed(r/min): 5000-6000
    Gear Positions: F-N-R
    Packing size: 114x64x41cm
    Ignition System: CDI
    Cooling System: Water-cooling
    Short shaft :40cm
    Control System: Tiller control
    Starting System: Manual start
    Control System: #93 gasoline
    N.W./G.W.(kgs): 26/31.2
    Bore x Stroke(mm): 59x45
    Recommended Propeller range: 3 -7"x9"
    Recommended Lubricant: Four Stroke Lubricating oil
    Mixing ratio: Pure gasoline
    Trim and tilt system: Manual Tilt
    Overall LxWxH(cm): 78.3x34.3x103.9
    Standard fueel tank capacity: 12L
    Optional fuel tand capacity: /
    Bonus accessories:
    brochures, tubing, cotter pins
    Pump impeller, start rope, start key
    12 liter fuel tank, tool kit, spark plug, cylinder head pad
    MODEL EIGHT:
    12 HP & 2-Stroke
    Cylinder Scoring is a serious damage,which caused by improper use and will cost you a lot of money to repair the motor.
    Must Read before using!
    Two stroke 12 hp:
    Firstly, Fill the gear oil (open gear box lid and fill it).
    Secondly, Fill NO. 92 petrol, lightly press oil pump 6-10 times.
    Thirdly, Fill engine oil don't exceed the head of the pattern.
    Forthly, turn the throttle to the start up and turn the accelerator gets up to 50%.
    Then, Rapidly pull the starter line.
    After the motor start, please turn the throttle to running state.
    Then, it can be operated now.
    Don't do the following will avoid cylinder Scoring:
    1,start the motor in the water
    2, use the motor when it stop cyling water
    Even if you want test the motor, it should be done in the river!
    When there is no water coming out from the motor,please stop using it immediately ,then check the impeller of Water pump or check if the water outlet has been blocked.
    About certification:
    We can only provide CE certification, there is no other certification can be provided,thanks for your understanding.
    Several issues with this motor first the linkage that goes from the gear selector to the starting rope to block the rope to be pull when the motor is in gear was unattached , and still after fixing it every time you go into any gear it gets unattached second, the starting rope doesn't retract all the way when you attend to start the engine
    Brand: HANGKAI
    Displacement: 169CC
    Gear ratio: 2.08(27:13)
    Cylinder: 2
    Max.Output(kw): 8.8
    Max.speed(r/min): 4500-5500
    Gear Positions: F-N-R
    Packing size: 120x70.5x37.5cm
    Ignition System: CDI
    Cooling System: Water-cooling
    Control System: Tiller control
    Starting System: Manual start
    Control System: #93 gasoline
    N.W./G.W.(kgs): 27/31
    Bore x Stroke(mm): 50x43
    Recommended Propeller range: 3 -9"1/4''x8"
    Recommended Lubricant: 2 Stroke Lubricating oil
    Mixing ratio: Fuel:oil=50:1
    Trim and tilt system: Manual Tilt
    Overall LxWxH(cm): 78.3x33.2x104
    Standard fuel tank capacity: 24L
    MODEL NIGHT:
    12 HP & 2-Stroke
    Cylinder Scoring is a serious damage,which caused by improper use and will cost you a lot of money to repair the motor.
    Don't do the following will avoid cylinder Scoring:
    1,start the motor in the water
    2, use the motor when it stop cyling water
    Even if you want test the motor, it should be done in the river!
    When there is no water coming out from the motor,please stop using it immediately ,then check the impeller of Water pump or check if the water outlet has been blocked.
    About certification:
    We can only provide CE certification, there is no other certification can be provided,thanks for your understanding.
    several issues with this motor first the linkage that goes from the gear selector to the starting rope to block the rope to be pull when the motor is in gear was unattached , and still after fixing it every time you go into any gear it gets unattached second, the starting rope doesn't retract all the way when you attend to start the engine
    Brand: HANGKAI
    Displacement: 246CC
    Short shaft :40cm
    Gear ratio: 2.08(27:13)
    Cylinder: 2
    Max.Output(kw): 13.2
    Max.speed(r/min): 5000-6000
    Gear Positions: F-N-R
    Packing size: 133x71x38.5cm
    Ignition System: CDI
    Cooling System: Water-cooling
    Control System: Tiller control
    Starting System: Manual start
    Control System: #93 gasoline
    N.W./G.W.(kgs): 38.6/49.5
    Bore x Stroke(mm): 56x50
    Recommended Propeller range: 3 -9"1/4''x8"
    Recommended Lubricant: 2 Stroke Lubricating oil
    Mixing ratio: Fuel:oil=50:1
    Trim and tilt system: Manual Tilt
    Overall LxWxH(cm): 78.3x33.2x105.3
    Standard fuel tank capacity: 24L
    Payment
    Delivery details
    Terms of sales
    About us
    Contact us
    Payment
    We accept ebay payment 。
    Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.
    Delivery details
    Shipping:
    The item will be shipped from our US warehouse to United States, which is more faster than from aboard.
    2-9 working days to: USA
    Terms of sales
    We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
    About us
    Your satis
    faction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.
    a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.
    b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.
    c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.
    Thank you.
    Contact us
    Business Hour
    Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
    Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
    Please contact us with ebay message.
    Please feel free to contact us if you have any questions.
    : Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
    Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
    Please contact us with ebay message.
    Please feel free to contact us if you have any questions.
    Feedback
    On Jul-18-21 at 18:49:08 PDT, seller added the following information: